What's Hot

HYDRO BAN Waterproofing Membrane

May 1, 2016


HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

Key Features

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher*
  • Does not require the use of fabric**
  • Bonds directly to metal and PVC plumbing fixtures only
  • Thin; only 0.5 mm–0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* Refer to cautions section of data sheet for more information on curing
** For gaps 3 mm or less see TDS1003 for complete instructions

LATICRETE Pty Ltd | Globally Proven Construction Solutions
29 Telford Street | Virginia, QLD 4014 Australia



Newsletter subscription